20 _ Standard Disassembly Drawings
Part
Figure
Description
DOOR HINGE /
GUIDE HINGE
(DW6*R70**BB)
5. Remove
HOLDER ROPE DOOR
from the
DOOR
HINGE
left & right with the DOOR closed.
Caution
Pay attention to DOOR drop after remove the
rope. It can cause injury.
GUIDE HINGE
6. Push both ribs of
GUIDE HINGE
to pull out the
DOOR.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge of broken parts.
About 15˚
7. Do same work at the opposite side, and pull out the
DOOR INNER assembly
to the direction of about
15˚.
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
8. Remove 2 screws to take off
BRACKET DOOR
FRAME
from the
DOOR INNER.
- Screws: DD81-02728A / 2 pcs
Warning
Do not this work without safety gloves. It can
cause injury from sharp edge.
9. Remove 2 screw at each side to take off
DOOR
HINGE
from the
DOOR INNER
.
- Screws: DD81-02764A / 4 pcs
10. Take off the
GUIDE HINGE
from the
DOOR
HINGE
.
NOTE
:
DOOR HINGE and GUIDE HINGE will serviced to
assembly only.
