12_
Installing your dishwasher
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.05 ~ 0.8 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220 ~ 240 V / 50 Hz.
• Install the product while the power cord is unplugged.
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
-
An AC 220 ~ 240 V / 50 Hz fuse or circuit breaker.
-
An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using tefl on tape or sealing compound to stop any water
leakage.
CAUTION
WARNING
Installing your dishwasher
FBI_DW9000H-Series-00167B-00_EN (Netherlands).indd 12
FBI_DW9000H-Series-00167B-00_EN (Netherlands).indd 12
2015-02-24 12:30:52
2015-02-24 12:30:52
