English
51
Be
for
e y
ou s
tar
t
Rinse aid level setting
You can change the amount of rinse aid applied during a cycle.
1.
Press the
Sanitize
button to select the rinse aid level setting menu.
- The display shows the current setting. (Default setting: “d4”)
2.
Press the
AUTO
cycle button to change the setting.
- You can select from d1 - d5 (minimum – maximum).
3.
Wait 5 seconds to save the setting.
Water hardness level setting
You can change the water hardness level according to water hardness in your local area.
Changing this setting will have effect on the salt consumption in the dishwasher’s salt
storage.
1.
Press the
Delay Start
button to select the water hardness level setting menu.
- The display shows the current setting. (Default setting: “H4”)
2.
Press the
AUTO
cycle button to change the setting.
- You can select from H1 – H6 (soft – hard).
3.
Wait 5 seconds to save the setting.
NOTE
• Change the setting according to the table in the “
” section on
• The manufactory setting: H4 (EN50242)
• The dishwasher regenerates the water softener once every 3–4 cycles depending on the
setting. However, the dishwasher will regenerate the water softener on the first cycle
after you change the setting.
DW7500RM_DD81-02968A-01_EN.indd 51
2019-10-23 10:41:25
Summary of Contents for DW6 R704 BB
Page 74: ...Notizen DW7500RM_DD81 02968A 01_DE indd 74 2019 10 23 10 40 59 ...
Page 75: ...Notizen DW7500RM_DD81 02968A 01_DE indd 75 2019 10 23 10 40 59 ...
Page 150: ...Memo DW7500RM_DD81 02968A 01_EN indd 74 2019 10 23 10 41 31 ...
Page 151: ...Memo DW7500RM_DD81 02968A 01_EN indd 75 2019 10 23 10 41 31 ...
