Samsung DW-32A20SD Page 52 Owner'S Instructions Manual Download

Page: 52 / 56

English - 52

Automatic Degaussing to Remove Colour Patches

Viewing Pictures From External Sources

Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.

Check that all the necessary connections have been made.

Switch your television on, then press the

VIDEO

button

repeatedly.

Result:

The input sources are displayed in the following
order:

AV1

AV2

S-Video - Component

➢

Depending on the source selected, the pictures may appear
automatically.

➢

To watch television programmes again, press the

TV/DTV

button and select the number of the channel required.

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.

If you move the television to a different position and color patches appear on the screen, you must:

◆

Switch the television off by pressing the “

” (On/Off) button on the front panel

◆

Unplug the television from the wall socket

◆

Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER” (

) button on the remote control.

☛

If your television will be left unattended, press the “

” (On/Off) button to turn your

television off.

AA68-03476A-00Eng_AUS 6/20/04 2:00 PM Page 52

Summary of Contents for DW-32A20SD

























































Search results

Summary of Contents for DW-32A20SD

Reviews:

Related manuals for DW-32A20SD

Brands by name

Popular brands

Samsung DW-32A20SD, Owner'S Instructions Manual

Search results

Summary of Contents for DW-32A20SD

Reviews:

Related manuals for DW-32A20SD

Brands by name

Popular brands