Installation
English
27
• A strain relief must be used. Do not loosen the nuts already installed on the terminal
block. Be sure they are tight. Use a
3
/
8
” (1 cm) deep well socket.
• Since january 1, 1996, The national electric code requires that new wiring (not existing)
utilize a 4-wire connection to this dryer.
STEP 4
Level the dryer
To ensure optimal performance, the dryer must be level.
A
B
1.
Gently slide the dryer into the desired
location.
2.
Use a
level (A)
and check the levelness
of the dryer from side to side and front
to back.
3.
If the dryer is not level, turn the
leveling feet (B)
left or right to adjust
the height.
4.
Once the dryer is level, make sure the
dryer stands firmly on the floor.
5.
Plug in the dryer.
A
B
NOTE
• To set the dryer to the same height
as your washer, turn the leveling
feet to the right until it fully
retracts
(A)
. Then, turn the leveling feet to
the left to
extend (B)
until the dryer
and the washer are the same height.
• Extend the leveling feet only as
much as necessary. Extending the
leveling feet more than necessary
can cause the dryer to vibrate.
DV3000A(SEM)_DC68-03784P-00_EN.indd 27
2020-12-07 4:50:56
Summary of Contents for DVE41A3000 Series
