Samsung DVD-VR320/XEF, Manual

Page: 174 / 249

Operating Instructions
Samsung Electronics 13-49
R
ecording
●
Recording Speed (VCR)
AUTO : Select when you want to set video quality
automatically. It depends on remaining time
of VCR tape.
SP
: Standard Play, for best picture quality.
LP : Long Play , for maximum recording time
(3 times SP).
●
V/P(VPS/PDC)
VPS
: Video Programme System
PDC : Programme Delivery Control
• Do not select V/P unless you are sure the programme
you wish to record is broadcast with VPS/PDC. If you
do set V/P to On, then you must set up the start-time
EXACTLY according to the published TV schedule.
Otherwise the timer recording
7
Press the
OK
button.
• will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap
The programmes are recorded in order of priority.
If timer recording is set for the first programme and
then again for the second programme and both
programmes overlap, the following message will
appear on the screen: “This setting is identical with
1.2” The message shows that the first programme
has priority. After recording of the first programme is
complete, the second programme starts being
recorded.
To exit without saving the current setting
Press the MENU or RETURN button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
8
Turn the power off to finish the timer recording.
•
will blink if disc or tape is not inserted.
• will appear on the front panel. It means that a
timer recording is registered.
The timer recording time may differ from the set
time depending on disc status and overall timer
recording status (for example, recording times
overlapping, or when the previous recording
ends within 3 minutes before the start time of
the next recording.)
The numbers next to each TV programme list-
ing are ShowView code numbers, which allow
you to programme your DVD Recorder & VCR
instantly with the remote control. Tap in the
ShowView code for the programme you wish
to record.
ShowView is a trademark of Gemstar
Development Corporation. The ShowView
system is manufactured under licence from
Gemstar Development Corporation.
Note
5
Press the number buttons to enter the code oppo-
site the programme that you wish to record in your
television magazine.
The Recording screen are displayed.
• If you wish to correct the ShowView code that
you are entering:
- Press the
œ
button until the digit to be correct-
ed is cleared
- Enter the correct digit
6
Fill in the items using the
…†œ √
buttons.
œ √
: Moves to the previous/next item,
…†
: Sets a value.
• To : Select the media to record DVD or VCR.
•
PR
: The video input source (AV 1, AV 2 or AUX),
or the broadcasting channel you want to
make a timer recording from.
• Day : Set the recording day.
Daily, MO-SA, MO-FR, W-SA, ...W-SU,
MON01, ...WED31
•
Start/End Time
: Start and end time of the timer
recording.
●
Recording Speed (DVD)
AUTO
: Select when you want to set video quality
automatically. It depends on the remaining
time on the DVD.
XP (high quality) : Select when audio and video quali-
ties are important. (Approx. 1 hour)
SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
LP (low quality) : Select when a long recording time
is required.(Approx. 4 hours)
EP (extended mode) : Select when a longer recording
time is required. (Approx.6
hours or 8hours)
RETURN OK MOVE EXIT
Scheduled Record List
DVD-RAM(VR)
01 DVD AV1 Daily 11:00 13:00 SP Off
√
02 DVD 01 Daily 09:22 10:30 SP Off √
03 -- --- --/-- --:-- --:-- -- --
√
04 -- --- --/-- --:-- --:-- -- -- √
05 -- --- --/-- --:-- --:-- -- --
√
06 -- --- --/-- --:-- --:-- -- --
√
No. To PR Day Start End Speed V/P Edit
No. 01
To PR Day Start End Speed V/P
DVD AUX FRI28 11:00 13:00 SP Off
Recordable Time 01:23 SP
When you are recording at EP mode on a DVD-
RW(V)/R disc, it may not record the full 6 or 8
hours because the unit uses the VBR(Variable
Bit Rate) ENCODING system.
For example, if you record a programme with a
lot of action, it uses a higher bit rate which in
turn consumes more disc memory.
Note
60 -
English