Samsung DVD-VR320/XEF, Manual

Page: 133 / 249

Operating Instructions
13-8 Samsung Electronics
English - 19
C
onnections
Press the
œ √
buttons to select Yes, and then
press the OK button. Make sure that the disc has
stopped completely before changing the mode.
• To cancel the progressive scan mode, press the
P.SCAN button in stop mode.
• Make sure that the colour coded connections
match. That is, the Y, P
B
and P
R
component output
jacks of your DVD Recorder & VCR should be
connected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
• Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of progressive scan picture prob-
lems, it is recommended that you switch the con-
nection to the standard definition output. If there
are questions regarding your Samsung TV set’s
compatibility with this DVD Recorder &VCR,
please contact our customer service center.
You have set the recorder to progressive format
(the PSO indicator lights ) even though your TV
cannot accept the progressive signal. In this case,
set “Progressive” to “Off” .
Even if your TV is compatible with progressive
format (576p) signals, the image may be affected
when you set the recorder to progressive format. In
this case, set“Progressive” to “Off” and the
recorder is set to normal (interlace) format .
If your TV does not have Progressive scan
mode, there will be no signal on the screen.
If you press the
P.SCAN
button, it will be
changed to Interlace scan mode.
See your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the
TV User’s instructions regarding Progressive
Scan settings in the TV’s menu system.
Depending on your TV, the method of
connection may differ from the illustration
above.
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has. Progressive scanning method
can provide better and clearer picture
quality.
You must connect the DVD Recorder & VCR
to the component(s) before using the
Progressive Scan feature.
Note
Connecting DVD Recorder & VCR
to the TV using the Component
Video Cable (DVD Only)
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture ele-
ment into black and white(Y), blue(P
B
), red(P
R
) signals
to present most clear and clean images.
1
Connect Component video cables between the
COMPONENT VIDEO OUT jacks on the rear of
the DVD Recorder & VCR and
COMPONENT
VIDEO IN jacks on the rear of the TV.
2 Connect audio cables between the audio output
jacks on the rear of the DVD Recorder & VCR and
AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of the left
and right channels.
❚
Progressive Scan
1
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder
& VCR to enjoy higher quality video.
2
Press the
P.SCAN
button on the front panel. The
message Press [Yes] to confirm Progressive scan
mode. Otherwise press [No] will be displayed.
COMPONENT INPUT