English
-
31
VCR F
unctions
Using the G-Code Feature
Before presetting your DVD-VCR:
• Switch on both the television and your DVD-VCR
• Check that the date and time are correct
• Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the
MENU
button, then press the
…
or
†
button to select
PROG
, then press the
OK
or
√
button.
The
Timer Method
menu is displayed.
2
Press the
…
or
†
button to select
G-Code
, then
press the
OK
or
√
button.
• It can be displayed simply by pressing the
TIMER
button on the remote control.
The Clock Settings menu will appear if the
time was not set on the first run.
SETUP
DVD
VCR
PROG
FUNC
Timer Method
Standard
√
√
G-Code
√
√
OK
RETURN
MENU
SETUP
DVD
VCR
PROG
FUNC
Timer Method
Standard
√
√
G-Code
√
√
OK
RETURN
MENU
Note
3
A message is displayed to allow you to enter the
G-Code
code.
• If all six programmes have been set, the message
Timer is full
is displayed. Refer to page 35 if you
wish to cancel a preset recording.
4
Press the number buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
• If you wish to correct the
G-Code
code that
you are entering:
- Press the
œ
button until the number to be
corrected is cleared.
- Enter the correct number.
5
Press the
OK
button.
The information concerning the programme is
displayed.
• When using the
G-Code
function for the first
time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
…
or
†
button.
For more details, please refer to page 32.
SETUP
DVD
VCR
PROG
FUNC
G-Code
Code - - - - - - - - -
Code : 0 – 9
Correct
:
œ
œ
OK
RETURN
MENU
:
:
:
:
:
:
:
:
:
:
:
:
OK
RETURN
MENU
PR
Day
Start
Stop
Speed
01 SA 01
13 : 25
19 : 57
SP