Getting Connected
Getting Connected
6
There are several ways to connect your DVD-
VCR. Select one of the following video/audio con-
necting that best suits you below.
4. Connecting to a Video input jack
1.
Connect a video(yellow) cable between the
VIDEO(yellow) OUT jack on DVD-VCR and
VIDEO(yellow) IN jack on the TV (or AV amplifier).
2.
Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD-VCR and AUDIO
IN jacks on TV(or AV amplifier).
• You will enjoy regular quality images.
5. Connecting to an S-Video input jack
1.
Connect an S-Video cable(not included) between
the S-VIDEO OUT jack on DVD-VCR and S-VIDEO
IN jack on the TV (or AV amplifier).
S-Video, Component video and Progressive
Output Modes
• S-Video and Component video output are avail-
able only if your TV supports S-Video input or
Component video input, respectively. If S-Video
or Component video output does not work, check
the TV connections and the TV input selection
settings.
• Compared to standard interlaced video, progres-
sive scan doubles the amount of video beam
lines fed to your TV, resulting in a more stable,
flicker-free, and clear image than interlaced
video. The progressive scan video output jack is
used in progressive output mode. This is only
available with TVs that support progressive scan.
• If you press the PROGRESSIVE button when
DVD-VCR is in stop mode or no disc is insert-
ed, the Video Output mode changed to
interlace scan mode.
7. Connecting to an Audio System(Dolby digital,
MPEG2 or DTS Amplifier)
1.
If using a coaxial cable (not included); Connect
Optical cable(not included) between the DIGITAL
AUDIO OUT (COAXIAL) jack on DVD-VCR and
DIGITAL AUDIO IN (COAXIAL) jack of the
Amplifier.
• When you connect the DVD-VCR to DTS
Amplifier and play a DTS disc, set the DTS to On
in Audio Setup menu. If it is set to Off, sound will
not be heard, or there will be a loud sound.
• Please turn the volume down when you turn on
the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
L
VIDEO
AUDIO OUT
R
ANT.
AUDIO IN
COMPONENT IN
P
R
P
B
Y
L
R
2
. Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD-VCR and
AUDIO IN jacks on TV(or AV amplifier).
• You will enjoy high quality images. S-Video separates the picture element into black and
white (Y) and color(C) signals to present clearer images than regular video input mode.
• Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD-VCR
and AUDIO IN jacks on TV(or AV amplifier).
6. Set the Video Output to Component(Interlace, Progressive) in the Display Setup menu.
You can use the PROGRESSIVE button to change the Video Output mode.
• You will enjoy high quality accurate color reproduction images. Component video separates
the picture element into black and White(Y), blue(PB), red(PR) signals to present most clear
and clean images.
• Make sure that the color coded connections match. The Y,PB,PR component output jacks of
your DVD-VCR must be connected to the exact corresponding component input jacks on
your TV. Otherwise, red or blue images will be displayed on the TV screen.