Getting Connected
Getting Connected
5
1. Connecting DVD-VCR to the TV using the RF
Cable
1. Remove the aerial or network input cable from
the television.
2. Connect this cable to the 75Ω coaxial socket
marked on the rear of your DVD-VCR.
3. Plug the RF cable supplied into the socket on
your DVD-VCR.
4. Plug the other end of the RF cable into the
connector previously used for the aerial on the
television.
3. Connecting DVD-VCR to a Satellite Receiver or
Other Equipment
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART
cable if the appropriate outputs are available on
the equipment chosen. The following illustrations
give a few examples of the connection possibili-
ties.
1.
AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) sock-
et on the rear of the DVD-VCR. After making
this connection, select the source by pressing
the INPUT SEL. button for the AV1 input
sources.
2.
By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e.g. re-adjust
to channel 65.
3.
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.)
socket on the rear of the DVD-VCR. After mak-
ing this connection, select the source by press-
ing the INPUT SEL. button for the AV2 input
sources.
3.
By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e.g. re-adjust
to channel 65.
2. Connecting DVD-VCR to the TV using the SCART Cable
You can connect your DVD-VCR to the television using the SCART cable if the appropri-
ate input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
• Regardless of the type of connection chosen, you must always connect the RF cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is
switched off.
• Make sure that both the television and the DVD-VCR are switched off before connect-
ing the cables.
1. Connect the RF cable as indicated in the previous previous section.
2. Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
3. Plug the other end into the appropriate connector on the television.
