ENG-16
C
O N N E C T I O N S
Connection to a TV (S-V
ideo)
-
Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio out or line out audio).
1
Using an S-V
ideo cable (not included), connect
the
S-VIDEO OUT
terminal on the rear of the
DVD-VCR to the
S-VIDEO IN
terminal of your
TV.
2
Using the audio cables, connect from the
AUDIO
OUT
or
LINE
OUT AUDIO (red and white)
terminals on the rear of the DVD-VCR to the
AUDIO (red and white) IN
terminals of your
TV.
Turn on the DVD-VCR and TV.
3
W
ith the unit in stop mode, set the Alt video
output to
S-V
ideo
in the Display Setup menu (see
pages 61~62) or press the
PROGRESSIVE
button on the remote control until S-V
ideo is
output.
Notes
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the
Video Out (Yellow) or RF Out jack connected.
- You can hear sound from
LINE
OUT AUDIO
or
AUDIO OUT
(red and
white) terminals for S-Video connection.
VCR audio only outputs through the Line Out Audio jacks (Red,White).
White
Audio Cable
S-Video Cable
(not included)
Red
Red
White
4
Press the input selector on your
TV remote
control until the S-Video signal from the DVD-
VCR appears on your TV screen.
00956G V5650 XAC_Eng1*01 14/3/06 10:05 Page 16
