Samsung DVD-R130/XAA, Service Manual

Page: 125 / 134

Circuit Operating Descriptions
Samsung Electronics 13-11
13-5 Video Output
13-5-2 NTSC/PAL Digital
DIC1 inputted from pin E1 with 13.5MHz generates HSYNC and VSYNC which are based on video signal. DIC1
is synchronous signals with decoded video signal.
The above signals, which are CVBS (Composite Video Burst Synchronized), Y(S_Video), C(S_Video),
Y(Component)/G(Green), Cr(component)/R(Red), Cb(component)/B(Blue), are selectively outputted 480I(inter-
laced Video Output), 480P(progressive Video Output) by the Pront button DIC1 adopts 10bit D/A converter.
DIC1 perform video en-coding as well as copy protection.
Fig. 13-8
A/V CODEC
DIC1
Y
C
Y
Cb
Cr
MM1692
VIC1
6dB
AMP
&
75ohm
Drive
LOW
PASS
FILTER
(6MHz)
CVBS
Y
C
Y
Cb
Cr
Front
Micom
IC601
PSO
13-5-1 Outline
DIC1 (MPEG2 Decoder & Encoder with video Encoder) diverges from the 13.5MHz crystal, then generates
VSYNC and HSYNC.
DIC1 (MPEG2 Decoder & Encoder with video Encoder) does RGB encoding, copy guard processing and D/A
conversion of 10bit Video signal converted into analog signal is outputted via amplifer of
analog part.