Samsung DVD-R121, Instruction Manual

Page: 31 / 88

English -
31
S
ystem Setup
5
Press the
…†
buttons to select the desired
item, then press the OK or
√
button.
You can connect the DVD Recorder to an external amp
or Home Theater.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
2 Press the
…†
buttons to select Setup, then
press the OK or
√
button.
3 Press the
…†
buttons to select Audio, then
press the OK or
√
button.
Audio setup menu will be displayed.
4 Press the
…†
buttons to select the desired
audio option, then press the OK or
√
button.
Setting up the Audio
Options
NOTE
Audio Options
Digital Output
1. PCM : Select this when you have no equipment that
can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are converted to
PCM Stereo.
2. Bitstream : Output Dolby Digital (or MPEG-2) audio as
bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.
■
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
NOTE
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV
amplifier does not have DTS decoder.
2. On : Outputs DTS Bitstream via digital output when you
play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the standard
Dynamic Range.
2. On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
■
When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
RETURN OK MOVE EXIT
Setup No Disc
System
√ √
Clock Set
√ √
Language
√ √
Audio
√ √
Video
√ √
Parental Control
√ √
Install
√ √
Programme
Setup
RETURN OK MOVE EXIT
Audio No Disc
Digital Output : PCM
√ √
DTS : Off
√ √
Dynamic Compression : On
√ √
Programme
Setup
RETURN OK MOVE EXIT
Audio No Disc
Digital Output : PCM
√ √
DTS : Off √ √
Dynamic Compression : On
√ √
Programme
Setup
PCM
Bitstream
■
Press the RETURN or
œ
button to return
to the previous menu.
Press the MENU button to exit the menu.
RETURN OK MOVE EXIT
Timer Record No Disc
Timer Record
√ √
Programme
Setup
00696A-R121-XST-Eng_17~37 5/2/05 8:31 PM Page 31