14
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the
DIGI-
TAL AUDIO OUT (OPTICAL)
terminal on the rear of the
DVD player to the
DIGITAL AUDIO IN (OPTICAL)
terminal
of the Amplifier.
If using a coaxial cable (not included), connect the
DIGI-
TAL AUDIO OUT (COAXIAL)
terminal on the rear of the
DVD player to the
DIGITAL AUDIO IN (COAXIAL)
termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO
,
S-
VIDEO
or
COMPONENT OUT
terminals on the rear of the
DVD player to the
VIDEO
,
S-VIDEO
or
COMPONENT IN
terminal of your TV as described on pages 9 to 12
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input
in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in
Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26-27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Optical Cable
(not included)
Coaxial Cable
(not included)
or
