English
_11
●
CONNECTIONS
Connection to a TV (Progressive)
1
Using component video cables, connect the
COMPONENT
VIDEO OUT
terminal on the rear of the DVD player to the
COMPONENT IN
terminal of TV.
2
Using the audio cables, connect the
AUDIO (red and
white) OUT
terminals on the rear of the DVD player to the
AUDIO (red and white) IN
terminals of TV. Turn on the
DVD player and TV.
3
Press the input selector on your TV remote control until
the Component signal from the DVD player appears on the
TV screen.
4
Set the Video Output to
P-SCAN
in the Display Setup
menu. (See pages 27)
To see the progressive video output,
You need a TV set supporting the progressive scan
input
function. And you have to set up the TV
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
- There is no commponent video displayed when " Scart-RGB" selected by pressing video select button on
the remote control
RED
WHITE
RED
WHITE
RED BLUE GREEN
RED
BLUE
GREEN
Audio Cable
Component cable
do not use the connection
Scart and Component Video
(Y, Pb, Pr) simultaneously.
Summary of Contents for DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS...
Page 104: ......
Page 140: ...AK68 01762A 03...