English
- 21
C
onnecting & Setting Up
Case 3 : Component Video output
jacks
Connect Component video cables(not supplied)
between the COMPONENT OUT(Y, P
B
, P
R
) jacks
on HDD & DVD RECORDER and COMPONENT
IN(Y, P
B
, P
R
) jacks on your TV.
You will enjoy high quality and accurate colour
reproduction images.
Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
and AUDIO IN jacks on TV (or AV ampli
fi
er).
(See pages 21~22).
After connecting, refer to the pages 37~38.
Green
Red
Blue
Green
Blue
Red
Make sure that the colour coded connections
match. The Y, P
B
, P
R
component output jacks
of your HDD & DVD RECORDER must be
connected to the exact corresponding
component input jacks on your TV.
Progressive setting is only available when the
Video Out is set to Component.
(See pages 37~38)
1.
•
2.
3.
M
Other type of connecting the Audio
output cable
There are several ways to output audio signal not
using scart cables. Select the audio connection
that best suits you below.
Case 1 :
Connecting to your TV
Case 2 :
Connecting to a stereo ampli
fi
er with AV
output jacks
Case 3 :
Connecting to an AV ampli
fi
er with a digital
output jack
Manufactured under licence from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
DTS, Inc.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Yellow
White
Red
Red
White
Yellow
•
•
•
