English
- 18
C
onnecting & Setting Up
Connecting the HDD & DVD RECORDER
This section involves various methods of
connecting the HDD & DVD RECORDER to other
external components and required initial setting
modes.
You can connect your HDD & DVD RECORDER to the
television using the SCART cable if the appropriate
input is available on the television.
Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1
socket on the rear of the HDD & DVD RECORDER.
Plug the other end into the appropriate connector
on the television.
Plug in the HDD & DVD RECORDER and TV
Turn on the HDD & DVD RECORDER and TV.
Press the
INPUT SEL.
button on your TV remote
control until the Video signal from the HDD & DVD
RECORDER appears on the TV screen.
3
2
1
To RF IN
To TV
RF Cable
To ANT INPUT
The RF cable connection of this product sends
only signals of TV. You must connect SCART
cable or Audio/Video cables to watch a DVD
from your HDD & DVD RECORDER.
TV mode : Press the
TV/DVD
button on
remote control, then “TV” appear on Front LED
display (or turn off HDD & DVD RECORDER).
Then you can watch programmes received
through TV.
1.
2.
3.
4.
5.
6.
M
Additional connections
You can connect your HDD & DVD RECORDER to
a satellite or digital tuner.
1
2
External device (VCR/Satellite receiver)
- DVD mode
Connect the AV2 connector of HDD & DVD
RECORDER and VCR/Satellite receiver or digital
tuner using a SCART cable.
Connect the AV1 connector to the SCART AV
connector on TV.
Turn on the HDD & DVD RECORDER, VCR/
Satellite receiver or digital tuner and TV.
Set Input mode on AV2.
- TV mode
Press the
TV/DVD
button on remote control, then
“TV” appear on Front LED display. (or turn off HDD
& DVD RECORDER.)
You can watch programmes from a satellite or
digital tuner connected to this HDD & DVD
RECORDER, even when the HDD & DVD
RECORDER is turned off.
1.
2.
3.
4.
1.
2.
Connecting & Setting Up
01392A_HR750_XEU-ENG-0423.indd 18
01392A_HR750_XEU-ENG-0423.indd 18
2007-04-24 9:31:38
2007-04-24 9:31:38