ENG-71
Reference
ENG-70
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
1.Turn on the TV.
2.Point the DVD’s remote control at the TV.
3.While holding the TV POWER button down, enter the code for your brand.
4.If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
You can control the TV POWER, CH (
,
), VOL (+, -) and TV/VIDEO
functions of another manufacturer's TV.
-
The remote control may not be able to control every model TV of the brands listed.
-
If you replace the remote control's batteries, set the brand code again.
e.g) For Samsung TVs
While holding down the TV POWER button, enter 0 and then 1.
BRAND
CODE
ANAM
10, 11, 12, 13, 14, 15, 16, 17, 18
AIWA
82
BANG&OLUFSEN
57
BLAUPUNKT
71
BRANDT
73
BRIONVEGA
57
CGE
52
CONTINENTAL EDISON
75
DAEWOO
19, 20, 23, 24, 25, 26, 27, 28, 29,
30 , 31, 32, 33, 34
EMERSON
64
FERGUSON
73
FINLUX
06, 49, 57
FORMENTI
57
FUJITSU
84
GRADIENTE
70
GRUNDIG
49, 52, 71
HITACHI
60, 72, 73, 75
IMPERIAL
52
JVC
61, 79
LG
06, 19, 20, 21, 22, 78
LOEWE
06, 69
LOEWE OPTA
06, 57
MAGNAVOX
40
METZ
57
MITSUBISHI
06, 48, 62, 65
MIVAR
52, 77
NEC
83
NEWSAN
68
NOBLEX
66
BRAND
CODE
NORDMENDE
72, 73
NOKIA
74
PANASONIC
53, 54, 74, 75
PHILIPS
06, 55, 56, 57
PHONOLA
06, 56, 57
PIONEER
58, 59, 73, 74, 75
RADIOLA
06, 56
RADIOMARELLI
57
RCA
45, 46
REX
74
SABA
57, 72, 73, 74, 75
SALORA
74
SAMSUNG
01, 02, 03, 04, 05, 06, 07, 08, 09
SANYO
41, 42, 43, 44, 48
SCHNEIDER
06
SELECO
74
SHARP
36, 37, 38, 39, 48
SIEMENS
71
SINGER
57
SINUDYNE
57
SONY
35, 48
TELEAVA
73
TELEFUNKEN
67, 73, 75, 76
THOMSON
72, 73, 75
THOMSON ASIA
80, 81
TOSHIBA
47, 48, 49, 50, 51, 52
WEGA
57
YOKO
06
ZENITH
63
TV Codes
C h a p t e r 6
R
E F E R E N C E
R
E F E R E N C E
Troubleshooting
Before requesting service (troubleshooting), please check the following.
No operations can be
performed with the
remote control.
The screen ratio
cannot be changed.
No audio.
Play mode differs from
the Setup Menu
selection.
Disc Menu doesn’t appear.
The icon appears
on screen.
Forgot password
The screen is blocked
If you experience other
problems.
5.1 channel sound is
not being reproduced.
Disc does not play.
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions are met. :
1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
• Check if the disc has a Menu.
• Some of the functions selected in the Setup Menu may not work properly if the
disc is not encoded with the corresponding function.
• The Screen Ratio is fixed on your DVDs.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
• Press the
button for more than 5 seconds with no disc inside and the tray
closed. All settings will revert to the factory settings.
• Press the
button for more than 5 seconds with no disc inside and the tray
closed. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center or call 1-800-SAMSUNG.
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
Action
Problem
Page
The picture is noisy or
distorted
P5
P8
P21
P60~61
P53~69
P64~65
P60~61
P23
P67~69
P4
00627F-HD950-XAC-Eng2 5/5/05 4:10 PM Page 70
