ENG-
16
C
O N N E C T I O N S
1
Using V
ideo/Audio cables, connect the
VIDEO
(yellow)/AUDIO
(red and white) OUT
jacks on the rear of the DVD player to the
VIDEO (yellow)/AUDIO (red and white) IN
jacks of your
TV.
2
T
urn on your DVD player and TV.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD
player.
- If you press the VIDEO SEL. button when the DVD Player is in play mode, stop mode or no disc is inserted,
the Video Output mode changes in the following sequence: ( I-SCAN
➝
P-SCAN).
When HDMI is connected, these output modes will not appear.
RED
WHITE
YELLOW
RED
WHITE
YELLOW
Audio Cable
(Included)
Video Cable
(Included)
3
Press the input selector button on your
TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Connecting to a TV (V
ideo)
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 16
