ENG
ENG
SETUP
Description-Front Panel
8
9
Description-Rear Panel
1
2
3
4 5 6
7
8
Front Panel Controls
1. STANDBY/ON
• When the unit is first plugged in, the indicator
lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. DISC TRAY
• Load the disc here.
3. DISPLAY
• Operation indicators are displayed here.
4. OPEN/CLOSE
• Press to open and close the disc tray.
5. PLAY/PAUSE ( )
• Begin or pause disc play.
6. STOP ( )
• Stops disc play.
7. SKIP ( / )
• Use to skip a scene or music.
8. EZ VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC
: No disc loaded.
OPEN
: The disc tray is open.
LOAD
: Player is loading disc information.
1
2
3
Front Panel Display
R
L
1
2
3
4
5
6
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
The S-Video must be selected in the VIDEO OUT SELECT.
5. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If Scart jack is selected, S-Video may not work.
If S-Video is selected, Scart jack may not work.
6. SCART AV JACK
• Connect to a TV with scart input jack.
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
NOTE
Rear Panel
