5
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single
connector.Using HDMI, the DVD player transmits a digital video and audio signal and displays a
vivid picture on a TVhaving an HDMI input jack.
• HDMI connection description HDMI connector
- Both uncompressed video data and digital audio data (LPCM or Bit Stream data).- Though the
player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears
on the screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data trans-
mitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an
analog-to-digital converter (in the TV) is required. During this conver-sion, the picture quality is
degraded due to noise and signal loss. DVI technology is superior because it requires no D/A con-
version and is a pure digital sig-nal from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted
via DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized.
E. Connection to an Audio System (2 Channel Amplifier, Dolby Digital,
MPEG2)
1.
Using the audio cables, connect the
AUDIO (red and white) OUT
terminals on the rear of the
DVD player to the
AUDIO (red and white) IN
terminals of the Amplifier. If using a coaxial cable,
connect the
DIGITAL AUDIO OUT (COAXIAL)
terminal on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL)
terminal of the Amplifier.
2.
Using the video signal cable(s), connect the
VIDEO, COMPONENT
or
HDMI OUT
terminals on
the rear of the DVD player to the
VIDEO
,
COMPONENT
or
DVI IN
terminals of your TV
3.
Turn on the DVD player, TV, and Amplifier.
4.
Press the input select button of the Amplifier to select
external input
in order to hear sound
from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
HDMI VIDEO Specifications (Only DVD-D530)
When you press the
HDMI SEL.
button, 480p, 576p, 720p, 1080p, 1080i are selected in order.
The first press of the
HDMI SEL.
button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.
- If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.
- If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player
using your TV remote control. This is only available with Samsung TVs that support (HDMI-CEC).
- If your TV has an
logo, then it will Supports the
Function.
B
C
D
E
A
C
B
E
A
DVD-D360K
2-Channel stereo amplifier
RED
RED
RED
RED
WHITE
WHITE
WHITE
WHITE
BLUE
BLUE
RED
RED
GREEN
GREEN
YELLOW
YELLOW
Audiokabel
Compo-
nentkabel
Video-
kabel
Coaxkabel
Do not use the connection
Scart and Component Video
(Y.Pb,Pr) Simultaneously
Audiokabel
Scartkabel
DVD-D530
2-Channel stereo amplifier
Coaxkabel
RED
RED
RED
RED
WHITE
WHITE
WHITE
WHITE
Audiokabel
Audiokabel
Video-
kabel
Compo-
nentkabel
Scartkabel
YELLOW
YELLOW
RED
RED
BLUE
BLUE
GREEN
GREEN
OR
HDMI-DVI kabel
HDMI kabel
Do not use the connec-
tion Scart and Com-
ponent Video (Y.Pb,Pr)
Simultaneously
Summary of Contents for DVD-D360K
Page 63: ...Memo ...
