10
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals aredelivered
through the audio output.)
1
Using an S-Video cable (not included), connect the
S-
VIDEO OUT
terminal on the rear of the DVD player to the
S-VIDEO IN
terminal of TV.
2
Using the audio cables, connect the
AUDIO (red and
white) OUT
terminals on the rear of the DVD player to the
AUDIO (red and white) IN
terminals of TV. Turn on the
DVD player and TV.
3
Press the input selector on your TV remote control until the
S-Video signal from the DVD player appears on your TV
screen.
4
Set the Video Output to
S-Video
in the Display Setup
menu. (See pages 28 to 29)
You can use the
VIDEO SEL.
button to change the Video
Output mode. (See page 9)
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)
- The number and position of terminals can vary depending on the TV set.
Please refer to the user's manual of the TV.
- Please do not connect S-Video and Component Video (Y, Pb, Pr) output simultaneously, as they may
interfere and degrade both video output quality.
- If you set the HDMI output resolution, S-Video output cannot be used.
RED
WHITE
RED
WHITE
Audio Cable
S-Video Cable
(not included)
Summary of Contents for DVD-1080P7
Page 1: ...DVD Player Lecteur DVD DVD Speler DVD 1080P7 ...
Page 113: ...Nederlands Memo Memo ...
Page 149: ...Nederlands Memo Memo ...
Page 150: ...AK68 01341M ...
