Drying a load of laundry _
45
02 DR
YING A L
O
AD OF LA
UNDR
Y
USING THE RACK DRY
1.
Open the dryer door.
2.
Position the drying rack in the tumbler, placing
the front lip of the drying rack on the top of the
lint fi lter.
3.
Place the rear legs in the two recessed areas
of the dryer’s back wall and push the middle of
the drying rack down to fi x it in place.
4.
Place the items to be dried on the rack, leaving
space between them so air can circulate.
5.
Close the dryer door.
6.
Tap the
Time Dry
button in the
Cycle
pane
of the
Cycle Selection
screen. Note that the
Rack Dry option is only available in the Time
Dry cycle.
7.
Tap the
Extras
section in the
Option
pane.
8.
Tap the
Rack Dry
button in the
Extras
section.
9.
Select the time according to the moisture and
weight of the item.
10.
Tap the
OK
button to apply the changes.
11.
Press the
Start/Pause
button to start drying.
To dry items made from materials that are vulnerable to heat such as foam rubber, plastic
and rubber, use the Air Fluff cycle. If you dry these kinds of items by applying heat, the
product may be damaged or a fi re may occur as a result.
Never use the drying rack with any cycle other than the Rack Dry cycle.
CHECKING THE FILTER
Checking the fi lter
The fi lter check notifi cation pops up before the
cycle you’ve set begins, reminding you to check
the dryer’s fi lter.
Cleaning the fi lter
Clean the fi lter to shorten drying time and operate the dryer with greater energy effi ciency.
Do not operate your dryer without the fi lter in place.
WARNING
WARNING
DV457E1_02836J-04_EN.indd Sec3:45
DV457E1_02836J-04_EN.indd Sec3:45
2013-08-08
4:25:44
2013-08-08
4:25:44
