troubleshooting
_31
PROBLEM
SOLUTION
Shuts off before load is dry
•
Dryer load is too small. Add more items or a few towels and restart
the cycle.
•
Dryer load is too large. Remove some items and restart the dryer.
Lint on clothes
•
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
•
Some fabrics are lint producers (for example, a fuzzy white cotton
towel)and they should be dried separately from clothes that are lint
trappers(for example, a pair of black linen pants)
•
Divide larger loads into smaller loads for drying
•
Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after
Wrinkle-Care
•
Small loads of 1 to 4 items work best.
•
Load fewer garments.Load similar-type garments.
Odors remain in clothing
after Refresh.
•
Fabrics containing strong odors should be washed in a normal cycle.
Water drips from nozzle
when Steam-Care starts
•
This is steam condensation. The dripping water will stop after a short
time.
Sprayed water is not visible
during Steam-Care
•
Sprayed water is difficult to see when the door is closed
05 tr
oubleshooting
DV350AE-02821C_EN_v1.indd Sec12:31
DV350AE-02821C_EN_v1.indd Sec12:31
2011-10-05 10:25:57
2011-10-05 10:25:57
