Engl
ish
Installation
English
26
A
2.
Insert one end of the accessory hose (the long
drain hose) into
hole (A)
.
3.
Position the other end (the outlet) over a laundry
sink or connect it to the drain pipe of a laundry
sink. See the instructions below or on the next
page.
Over a laundry sink:
A
C
B
B
C
*
D
E
1.
Make sure to place the end of the accessory hose
no more than
3 ft. (90 cm)
above the bottom of
dryer.
2.
To bend the accessory hose so that it hooks over
the edge of the sink, use the supplied plastic
hose
guide (B)
and secure the guide to the wall with a
hook or to the tap with a piece of string. Assemble
the
drain hose (A)
and the
hose guide (B)
and fix
them with the
cable-tie (C)
.
CAUTION
Do not extend the drain hose by connecting another
hose to it. Water can leak from the connected area. If
you need more length, use a longer drain hose.
ln a standpipe or laundry tub
The laundry tub
(B)
or standpipe
(C)
must be no
higher than 35.4 In (90 cm).
Make sure the drain hose and the standpipe are not
airtight.
NOTE
D: Hose retainer / E: Tie straps
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 26
2022/8/30 17:01:56
