Installation
Installation
English
18
•
Insert the power cord with a UL-listed strain relief through the hole provided in the
cabinet near the terminal block.
•
A strain relief must be used.
•
Do not loosen the nuts already installed on the terminal block. Be sure they are tight.
•
Use a 3/8” (1 cm) deep well socket.
STEP 2
Level the dryer
Before you install the dryer, make sure you have read the Installation requirements on
page 9. Please note that the following instructions are for installation without using a
drain hose. For instructions on using a drain hose, see the next section, Drain hose (if
necessary) on page 20. For convenience, consider installing the dryer next to your washer.
A
B
1.
Carefully move the dryer to the desired
location.
2.
Use a
level (A)
and check the levelness
of the dryer from side to side and front
to back.
3.
If the dryer is not level, adjust the
levelling legs (B)
. Turning a leg counter-
clockwise retracts the leg. Turning a leg
clockwise extends the leg.
4.
Once the dryer is level, make sure the
dryer stands firmly on the floor.
5.
Plug in the dryer.
DV6850N_DC68-03650E-03_EN.indd 18
2018/11/29 11:19:47