background image

Safety information

SAVE THESE INSTRUCTIONS

Safety information

SAVE THESE INSTRUCTIONS

English

6

 

6. 

Before the appliance is removed from service or discarded, remove the door to the 

drying compartment.

7. 

Do not reach into the appliance if the drum is moving.

8. 

Do not install or store this appliance where it will be exposed to the weather.

9. 

Do not tamper with internal controls.

10. 

Do not repair or replace any part of the appliance or attempt any service unless 

specifically recommended in the user-maintenance instructions or in published user-
repair instructions that you understand and have the skills to carry out.

11. 

Do not use fabric softeners or products to eliminate static unless recommended by the 

manufacturer of the fabric softener or product.

12. 

Clean the lint screen before or after each load.

13. 

Do not use heat to dry articles containing foam rubber or similarly textured rubber-

like materials.

14. 

Keep area around the exhaust opening and adjacent surrounding areas free from the 

accumulation of lint, dust, and dirt.

15. 

The interior of the appliance and exhaust duct should be cleaned periodically by 

qualified service personnel.

16. 

Do not place items exposed to cooking oils in your dryer. Items contaminated with 

cooking oils may contribute to a chemical reaction that could cause a load to catch 
fire.

17. 

This appliance must be grounded. See “

Electrical requirements

” and ”Grounding” in 

Installation

” section.

18. 

Do not allow children to play on or in the appliance. Close supervision of children is 

necessary when the appliance is used near children.

19. 

Do not insert your hand under the dryer.

•  This may result in injury.

20. 

Take care that children’s fingers are not caught in the door when closing it.

•  This may result in injury.

21. 

The Control board and inlet valve are intentionally not grounded and may present a 

risk of electric shock only during servicing.

•  Do not contact these parts while the appliance is energized.

DV22K6800-03650A-00_EN (US)_151211.indd   6

2015-12-11     7:15:41

Summary of Contents for DV22K6800EW





























































Reviews: