background image

safety instructions 

_3

GROUNDING INSTRUCTIONS 

for a permanently connected appliance:

 

This appliance must be connected to grounded metal, a permanent wiring system, or an 
equipment-grounding conductor must be run with the circuit conductors and connected to 
the equipment-grounding terminal or lead on the appliance. 

The dishwasher is very heavy. Do not attempt to move or carry a dishwasher alone. Two or 
more people are needed to move a dishwasher and avoid potential injuries.

If the power cable is damaged, it must be replaced by the manufacturer, a service agent or 
similarly qualified person in order to avoid a hazard.

Do not touch the power cable with wet hands.

Do not connect another appliance to the same power outlet as the dishwasher.

Make sure to use a new water supply line. Old lines are susceptible to breakage because 
they become hardened and may cause property damage due to a water leakage.

The dishwasher must be connected to a hot water supply between 120 ˚F(49 ˚C)~ 149 ˚F 
(65 ˚C). This temperature range provides the best washing result and shortest cycle time. 
Temperature should not exceed 149 ˚F (65 ˚C), to prevent damage to dishes. 

Ensure that the water supplied to the dishwasher does not freeze. Frozen water can 
damage the hoses, valves, pump, or other components.

Certified residential dishwashers are not intended for licensed food establishments.  
(NSF/ANSI Standard 184 for Residential Dishwashers)

For a full list of safety information, please refer to the User Manual.

BEFORE INSTALLING THE DISHWASHER

WARNING

Tip-Over Hazard

Do not use the dishwasher until it is correctly installed.

Do not push down on an open door.

Do not place excessive weight on the open door.

Electric Shock Hazard

Failure to follow these instructions can result in death, fire, or electric shock:

Electrically ground the dishwasher

Connect the ground wire to the green ground connector in the junction box.

Do not use an extension cord.

To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that 
the dishwasher is completely enclosed at the time of installation.

CAUTION

CAUTION

CAUTION

WARNING

installation_DD68-00046A-03_EN.indd   3

2010-10-19   �� 2:24:48

Summary of Contents for DMT800 Series





























































Reviews: