3-17
3. Disassembly and Reassembly
Part
Photo
Description
SYCHRONOUS
MOROR
&
DISTRIBUTOR
HEATER HOUSING
ASS’Y (1)
26.Sychronous motor & Distributor
Caution
* If necessary, rub with a dry towel remainning water
water in order to keep clean SUMP ASS’Y.
* In assembling, confirm the assembly condition of
contact heater housing gasket.
* When heater housing gasket is deformation, you
must change new one.
2) Remove the five (5) screws holding HEATER
HOUSING ASS’Y in place.
Ƒ
Separate housing L/R
Ƒ
Separate main pcb ass'y
Ƒ
Separate top table ass’y
Ƒ
Separate tub ass'y
Ƒ
Separate sump ass'y
1) Remove the two (2)SYCHRONOUS MOTOR
connectors.
2) Remove the two (2) screws holding SYCHRONOUS
MOTOR in place.
3) Remove the SYCHRONOUS MOTOR and
DISTRIBUTOR.
27.Heater housing ass'y (1)
Ƒ
Separate housing L/R
Ƒ
Separate main pcb ass'y
Ƒ
Separate top table ass’y
Ƒ
Separate tub ass'y
Ƒ
Separate sump ass'y
1) Remove the all HEATER HOUSING ASS’Y connectors.
3) Remove the HEATER HOUSING ASS’Y and HEATER
HOUSING SEAL.