installation
4_
installation
INSTallINg ThE PrOgram
Following the instructions below to install the program.
1.
Use the USB cable to connect between Samsung Digital Presenter and PC. Then, turn on the digital
presenter.
2.
Install the Samsung Digital Presenter program.
For more information, refer to “
Installing Samsung Digital Presenter installer program
”. (page 5)
Connecting Samsung Digital Presenter to the PC
Connect one end of the USB cable to the USB port of the PC, and the other end to that of the digital
presenter.
Plug the power cable and turn on the presenter.
J
`
It is recommended to connect the USB cable to the USB port on the main board of your PC.
(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)
Use only the USB cable of less than 4.0m in length.
`
Use the USB cable provided by Samsung Techwin.
(Using a cable from different manufacturer may cause problem depending on the cable specifications.)
DC 5V IN
RS-232C
USB
C-VIDEO
VGA OUT
USB
USB Cable
PC
Digital Presenter
