Samsung DIGIMAX D103, User Manual

Page: 23 / 82

《
22
》
Flash ( ) / Left button
●
If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
●
Using the flash frequently will reduce the life of the battery.
●
Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
●
During the continuous shot, AEB and movie clip mode, the flash function will
not operate.
●
Take photographs within the flash range.
●
The image quality is not guaranteed if the subject is too close or highly
reflective.
●
When taking an image in a poorly lit condtion with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the floating matters. It is not camera malfuction.
INFORMATION
●
Flash range (Unit : m)
■
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■
When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
●
Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 4.8 0.8 ~ 4.3 0.4 ~ 0.8 0.5 ~ 0.8 0.4 ~ 4.8 0.5 ~ 4.3
ISO
AUTO
[Selecting the Auto flash]
Normal Macro Auto macro