SAMSUNG
DCS-816
Installation Manual
6-6
6.6 ISDN TERMINAL EQUIPMENT (ISDN phone, G4 FAX, etc)
(Figure
6-5)
ISDN Terminal Equipment (TE) can be connected to any circuit on the BRI card if installed. As de-
scribed in section 5.4, the system provides S
0
as well as T
0
application on a port basis. The sys-
tem requires MDF connection for a BRI card and the connection can be made through the Champ
connector. See Figure 2-3 and refer to section 2.5 (MDF Cabling).
Use two pair twisted wires and connect each ISDN TE to the BRI port of your choice via the
Champ connector on the base board.
Note that the DCS Compact BRI card does not provide power to the ISDN terminal equipment.
CONNECTING ISDN TERMINAL EQUIPMENT
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
FIGURE 6-5
CHAMP CONNECTION
PIN COLOUR
CIRCUITS / FUNCTIONS
CONNECT ISDN TE TO ANY BRI PORT WHEN A
BRI CARD IS INSTALLED
NO POWER SUPPLY TO ISDN TE
28/ 3 W-GR/ GR-W
T/R, TX of 1
st
BRI port
29/ 4 W-BR/ BR-W
T/R, RX of 1
st
BRI port
30/ 5 W-S/ S-W
T/R, TX of 2
nd
BRI port
31/ 6 R-BL/ BL-R
T/R, RX of 2
nd
BRI port
32/ 7 R-O/ O-R
T/R, TX of 3
rd
BRI port (4BRI)
33/ 8 R-GR/ GR-R
T/R, RX of 3
rd
BRI port (4BRI)
34/ 9 R-BR/ BR-R T/R, TX of 4
th
BRI port (4BRI)
35/10 R-S/ S-R
T/R, RX of 4
th
BRI port (4BRI)
ISDN TEs
