Samsung DC32E Page 15 User Manual Download

Page: 15 / 148

Preparations

Chapter 02

Checking the Components

Contact the vendor where you
purchased the product if any
components are missing.

The pictures may look different from the
actual components.

A stand is not provided with the product.
To install a stand, you can purchase one
separately.

The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.

Components

―

Components may differ in different locations.

Quick Setup Guide

Warranty card
(Not available in some locations)

Regulatory guide

Power cord

Batteries
(Not available in some locations)

Remote Control

D-SUB cable
(EDE and EME Model Only)

RS232C(IN) adapter

Holder-Ring (4EA)
(EDE and EME Model Only)

Summary of Contents for DC32E





















































































































































Search results

Summary of Contents for DC32E

Reviews:

Related manuals for DC32E

Brands by name

Popular brands

Samsung DC32E, User Manual

Search results

Summary of Contents for DC32E

Reviews:

Related manuals for DC32E

Brands by name

Popular brands