Samsung DC32E Page 135 User Manual Download

Page: 135 / 148

135

Sound issue

There is no sound.

Check the connection of the audio cable or adjust the volume.

Check the volume.

The volume is too low.

Adjust the volume.

If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.

Video is available but there is no sound.

If an HDMI cable is connected, check the audio output settings on the PC.

Go to

Sound

and change

Speaker Select

Internal

If a source device is used

•

Make sure the audio cable is properly connected to the audio input port on the product.

•

Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the cable box
may need to be changed to HDMI.)

If a DVI-HDMI cable is used, a separate audio cable is required.

If the product has a headphone port, make sure nothing is connected to it.

Reconnect the power cable to the device and then reboot the device.

There is static coming from the speakers.

Check the cable connection. Make sure a video cable is not connected to an audio input port.

Check the signal strength after connecting a cable.

Low signal level can cause corrupted sound.

Summary of Contents for DC32E





















































































































































Search results

Summary of Contents for DC32E

Reviews:

Related manuals for DC32E

Brands by name

Popular brands

Samsung DC32E, User Manual

Search results

Summary of Contents for DC32E

Reviews:

Related manuals for DC32E

Brands by name

Popular brands