Samsung DB43J User Manual Download

Page: 46 / 156

Connecting to a Video Device

• Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

• You can connect a video device to the product using a cable.

―

Connecting parts may differ in different products.

―

Press the

SOURCE

button on the remote control to change the source.

Connection Using an HDMI-DVI Cable

― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI

cable. To resolve this, additionally connect an audio cable to the audio ports on the product

and video device.

― After connecting a video device to the product with an HDMI-DVI cable, make sure to

configure the settings as shown below to enable the video and audio from the video device.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. Audio

is not available if the DVI port on the product is connected to the HDMI port on the PC using

a DVI-HDMI adapter.

―

Sound

→ set

HDMI Sound

AV(HDMI)

―

Picture

→ set each screen mode to

Video/Image

under

Picture Mode

―

System

→

General

→ set

HDMI Hot Plug

― Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.

―

The QHH models do not support the

DVI

and

AUDIO

ports.

DVI/HDMI/AUDIO IN

DBJ / QBH: HDMI IN 1 (ARC), HDMI IN 2

QHH: HDMI 1 (ARC), HDMI 2

QMH: HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN)

HDMI

DVI/MAGICINFO IN

Summary of Contents for DB43J





























































































































































Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands

Samsung DB43J, User Manual

Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands