Samsung DB43J User Manual Download

Page: 124 / 156

124

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

―

Standby Control

is not available when the input source is set to

•

Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to

the display.
The message

No Signal

will appear if no source device is connected.

•

Off

The message

No Signal

will appear if no input signals are detected.

―

No Signal

is displayed although a source device is connected, check the cable connection.

―

No Signal Message

is set to

Off

, the

No Signal

message does not appear.

If this is the case, set

No Signal Message

•

Power-saving mode will activate if no input signals are detected.

Network Standby

This feature keeps the network power on when the product turns off.

•

Off

Power Button

The power button can be set to either turn on the power or turn on/off the power.

•

Power On Only

: Set the power button to turn on the power.

•

Power On/Off

: Set the power button to turn on/off the power.

Power Control

Auto Power On

PC Module Power

Max. Power Saving

Standby Control

Network Standby

Power Button

Off

Power On Only

– The displayed image may differ depending on the model.

Summary of Contents for DB43J





























































































































































Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands

Samsung DB43J, User Manual

Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands