setting up
_23
01
SETTING
UP
Cartridge
Holder
Clip
Filter
cartridge
Plastic line
(Purchased)
• You can purchase the necessary filter
cartridge at the retailer where you
purchased this refrigerator.
• Water line must be connected to drinkable
water only
• When pushing the Refrigerator back, make
sure you don’t roll over the power cord or water
line(Icemaker supply line)
To use without the water filter
Connecting to the water supply line
• Shut off the main water supply line and turn the
Ice maker to the off position.
• Locate the nearest cold water drinking line.
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
Connect the water line to the fridge
1.
Slip the compression nut through the plastic
tubing.
2.
After inserting the compression nut into plastic
tubing, tighten the compression nut onto 7 mm
compression fitting (Purchased).
Do not overtighten the compression nut.
• Using Copper Tubing
- Slip the compression nut and ferrule on copper
tubing as shown.
• Using Plastic Tubing
- Insert the molded end(Bulb) of the plastic tubing
into the compression fitting.
Do not use without the molded end(Bulb) of
the plastic tubing.
3.
Tighten the compression nut onto the
compression fitting.
4.
Turn water on and check for any leakage.
• You can purchase the necessary filter
cartridge at the retailer where you
purchased this refrigerator.
• Water line must be connected to drinkable
water only.
• When pushing the Refrigerator back, make sure
you don’t roll over the power cord or water line
(Icemaker supply line).
Household water line
Compression
Nut (1/4”)
(Purchased)
Compression
fitting *
Compression
Nut (1/4”) *
Bulb
Plastic Tubing
(Purchased)
(Not supplied)
(Not supplied)
Copper tubing or Plastic tubing
Refrigerator
Ferrule
(Purchased)
CAUTION
* Accesory included
DA68-02787A (EN)-05.indd 23
2017. 8. 9. �� 10:51
