English 17
W
arr
anty and servic
e
Hob Frame
WARNING
Do not use vinegar, lemon juice or scale remover on the hob frame; otherwise dull
blemishes will appear.
1.
Wipe the frame with a damp cloth.
2.
Moisten dried debris with a wet cloth. Wipe and rub dry.
To avoid damaging your appliance
•
Do not use the cooktop as a work surface or for storage.
•
Do not operate a cooking zone if there is no pan on the cooktop or if the pan
is empty.
•
Ceramic glass is very tough and resistant to temperature shock, but it is
not unbreakable. It can be damaged by a particularly sharp or hard object
dropping onto the cooktop.
•
Do not use pans made of cast iron or which have damaged bases with rough
edges or burrs. Scratching may occur if these pans are slid across the surface.
•
Do not place pans on the hob frame. Scratching and damage to the finish may
occur.
•
Avoid spilling acidic liquids, for example, vinegar, lemon juice and descaling
agents, onto the hob frame, since such liquids can cause dull spots.
•
If sugar or a preparation containing sugar comes into contact with a hot
cooking zone and melts, it should be cleaned off immediately with a kitchen
scraper while it is still hot. If allowed to cool, it may damage the surface when
removed.
•
Keep all items and materials that could melt, for example, plastics, aluminium
foil and oven foils, away from the ceramic glass surface. If something of
this nature melts onto the cooktop, it must be removed immediately with a
scraper.
Warranty and service
FAQs and troubleshooting
A fault may result from a minor error that you can correct yourself with the help
of the following instructions. Do not attempt any further repairs if the following
instructions do not help in each specific case.
WARNING
Repairs to the appliance are to be performed only by a qualified service technician.
Improperly effected repairs may result in considerable risk to the user. If your
appliance needs repair, please contact your customer service centre.
What should I do if the cooking zones are not functioning?
Check for the following possibilities:
•
The fuse in the house wiring (fuse box) is intact. If the fuses trip a number of
times, call an authorised electrician.
•
The appliance is properly switched on.
•
The control indicators in the control panel are illuminated.
•
The cooking zone is switched on.
•
The cooking zones are set at the desired heat settings.
What should I do if the cooking zones will not switch on?
Check for the following possibilities:
•
A period of more than 10 seconds has elapsed between when the
On / Off
button was actuated and the desired cooking zone switches on (see the
section
).
•
The control panel is partially covered by a damp cloth or liquid.
What should I do if the display except for the residual warmth indicator
suddenly disappears?
This could be a result of one of two possibilities:
•
The
On / Off
sensor was accidentally actuated.
•
The control panel is partially covered by a damp cloth or liquid.
CTR464NB01P_FA_DG68-00963A-00_EN.indd 17
2017-04-16 7:42:30
