Alignment and Adjustments
3-8
Samsung Electronics
3-3-7 Color Purity Adjustment
1. Warm up the receiver. Operate it for 20 min-
utes, with the Brightness control set to maxi-
mum.
2. Fully degauss the receiver. Use an external
degaussing coil.
3. Roughly adjust convergence by rotating the
Convergence Magnet.
4. Input a black and white signal.
5. Loosen the Deflection Yoke clamp screw, and
move the Deflection Yoke as close to the puri-
ty magnet as possible.
6. Loosen the Purity Magnet clamp. Adjust the
purity magnet so that the vertical green raster
is precisely at the center of the screen. Then
tighten the clamp.
7. Slowly move the Deflection Yoke forward, and
adjust it for the best overall green screen.
8. Tighten the Deflection Yoke clamp screw.
Fig. 3-1 Tube Assembly
RUBBER WEDGES
30
30
LOCATION
DEFLECTION
YOKE
30
RUBBER WEDGE
ADHESIVE
RUBBER
WEDGES
KIT
RUBBER
WEDGES
PURITY AND
CONVERGENCE
MAGNET ASS'Y
CRT
DEFLECTION
YOKE
TAPE
CLOTH
GRASS
(1-3/16")
31 mm
Fig. 3-2 Purity and Convergence Magnets
2 POLE
PURITY
YOKE
CLAMP
SCREW
6 POLE
CONVERGENCE
4 POLE
CONVERGENCE
ADJUST THE ANGLE
(VERTICAL LINES)
FIXED
ROTATE TWO TABS
AT THE SAME TIME
(HORIZONTAL LINES)
Summary of Contents for CT566BVX/STR
