Samsung CS34A10 Owner'S Instructions Manual Download Page 2

Page: 2 / 68

ENG

Safety Instructions

◆

Do not expose the television to extreme temperature conditions or to extreme humidity conditions.

◆

Do not expose the television to direct sunlight and other sources of heat.

◆

Do not expose the television to any liquids.

◆

Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.

◆

During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.

◆

Do not step on or twist the power cord.

◆

Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

◆

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

◆

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

◆

If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.

◆

Do not drop the remote control.

This device is not for use in industrial environments.

S58A_UK(02796A-01) 10/30/03 10:16 PM Page 2

Summary of Contents for CS34A10





































































Search results

Summary of Contents for CS34A10

Reviews:

Related manuals for CS34A10

Brands by name

Popular brands

Samsung CS34A10, Owner'S Instructions Manual

Search results

Summary of Contents for CS34A10

Reviews:

Related manuals for CS34A10

Brands by name

Popular brands