28
ENG
Selecting the Sound Mode
(depending on the model)
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE button (
) on the remote control.
Result:
The sound is switched off and “
” is displayed.
2
When you wish to turn the sound back on, press the MUTE button
(
) again or either of the volume buttons.
Result:
The sound comes back on at the same volume as
before and the “
“ indication disappears.
Switching the Sound Off Temporarily
The “S.MODE” button displays/controls the processing and output
of the audio signal. When power is switched ON, the mode is
automatically preset to either “Dual-
I
” or “Stereo”, depending on
the current transmission.
➣
◆
If the receiving conditions deteriorate, listening will be easier if
the mode is set to the “Mono” position using the S.MODE button.
◆
If the stereo signal is weak (or if intermittent Stereo-Mono) and
automatic switching occurs, then switch to the “Mono” mode.
◆
When receiving mono sound in the AV mode, connect to the “L”
input jack on the panels. If the mono sound comes out only from
the left speaker, then press the S.MODE button.
Type of broadcast
Regular broadcast
(Standard audio)
R
NICAM Mono
NICAM Stereo
NICAM Dual-
I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-
I/II
Stereo
On-screen indication
Mono (Normal use)
Mono
↔
Mono
Nicam
(Normal)
Stereo
↔
Mono
Nicam
(Normal)
Mono (Normal use)
Dual-
I
↔
Dual-
II
Stereo
↔
Mono
(Forced Mono)
Dual-
I
→
Dual-
II
→
Mono
Nicam
Nicam (Normal)
NICAM
Stereo
A2
Stereo
→
→
