English - 7
Sound -
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Sound / Half Mute
◆
Mode: Standard/Music
/Movie/Speech/Custom
You can select the type
of special sound effect to
be used when watching a
given broadcast.
➢
You can select these
options simply by pressing the
S.MODE
button on the
remote control.
◆
Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to
Custom
.
◆
Auto Volume
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
◆
Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the
Pseudo
Stereo
is set to
On
or
Off
, these settings apply to the
sound effects such as
Standard, Music, Movie
, and
Speech
.
◆
Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO
button on the remote control.
◆
Half Mute
You can reduce volume to half and control volume even
in the mute mode.
Method:
ENTER
: On/Off
The
DUAL I-II
button displays/
controls the processing and
output of the audio signal. When
power is switched on, the mode
is automatically preset to either
“Dual-I ” or “Stereo”, depending on the current transmission.
Selecting the Sound Mode
(depending on the model)
➢
◆
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono
.
◆
If the stereo signal is weak and an automatic
switching occurs, then switch to the
Mono
.
◆
When receiving a mono sound in the AV mode,
connect to the “AUDIO-L” input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the
DUAL I-II
button.
◆
NICAM Stereo
Type of broadcast
Mono
(Normal use)
Dual-I
NICAM
Dual-II
NICAM
Mono
(Normal)
↔
↔
R
NICAM Mono
Regular broadcast
(Standard audio)
NICAM Dual-I/II
On-screen indication
Mono
NICAM
Mono
(Normal)
↔
NICAM Stereo
Stereo
NICAM
Mono
(Normal)
↔
◆
A Stereo
Type of broadcast
Mono
(Normal)
Bilingual or Dual-I/II
Regular broadcast
(Standard audio)
On-screen indication
Dual-I
↔
Dual-II
Stereo
Stereo
Mono
(Forced mono)
↔
◆
Mode: Dynamic/ Standard/
Movie/Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
◆
You can select these options
simply by pressing the
P.MODE
button on the remote control.
◆
Contrast/Brightness/Sharpness/Colour/Tint
(NTSC
only)
The television has several settings which allow you to
control the picture quality.
◆
Colour Tone
:
Cool/Cool/Normal/Warm/Warm
➢
Warm1,Warm2 can be selected only when the TV is
in the Movie mode.
◆
Reset
You can return to the factory defaults.
The reset function is set for each mode (
Dynamic,
Standard
or
Movie
.).
Picture - Mode
Picture - Digital NR
◆
Digital NR
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
◆
Tilt
If you find that the picture received is slightly titled to one
side, you can adjust the title setting(-7 to +7).
◆
Size
You can select a picture size among Normal/Zoom/Wide.
Mode
: Standard ►
Equalizer
►
SRS TS XT
: Off
►
Auto Volume
: Off
►
Turbo Sound
: Off
►
Pseudo Stereo
: Off
►
Half Mute
: Off
►
Sound
T V
Enter
Move
Exit
Mode
: Dynamic ►
Contrast
100
Brightness
45
Sharpness
75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
►
▼ More
Picture
T V
Enter
Move
Return
▲ More
Size
: Normal
►
Digital NR
: Off
►
Tilt
: 0
Reset
: OK
►
Picture
T V
Enter
Move
Return
P.SIZE
STILL
P.MODE S.MODE
SIZE
SOURCE
P
TURBO POSITION
DUAL
AA68-03964D-00Eng_0423.indd 7
2008-06-05 오후 5:34:42
SWAP
