22_ Operating advanced function
Operating advanced function
SETTING THE TIME
Your monobloc unit contains a clock used to start and stop the unit automatically at a given time.
You must set the time when you purchase the monobloc unit or reset this system.
1.
Push the
Set
button for 3 seconds.
• Mode : Normal operation.
• When setting the time, you can only use
Up
,
Down
,
Set
,
Cancel/Delete
button.
• To cancel the setting, press the
Cancel/Delete
button.
2.
Set the day by pressing
Up
or
Down
button.
The ‘day’ indicator will blink. Set the day and press
Set
button to save the setting.
3.
Set the hour by pressing
Up
or
Down
button.
The ‘hour’ indicator will blink. Set the hour and press
Set
button to save the setting.
4.
Set the minute by pressing
Up
or
Down
button.
The ‘minute’ indicator will blink. Set the minute and
press
Set
button to save the setting.
After setting the minute, the operation returns to normal.
RC120MHXGA_IB_E_34412A(1).indd 22
2012-02-08 오후 2:35:42
