12
Use LEFT and RIGHT arrows to select low temperature or high temperature, then use the UP and
DOWN
▼▲
arrows to set the temperature value. After successfully setting the temperature range,
choose
ON
and then press the
OK
button to confirm the setting.
Choose
OFF
to disable temperature alert function.
A/V Out
The menu is to choose the TV system and resolution when
outputting the video/audio to TV, DVR/VCR or other
viewing/recording devices.
Factory Reset
Choose
Yes
to reset the receiver to factory defaults – all menu
settings will be reset.
NOTE: Camera pairing settings will NOT be affected by a reset.
Cameras will remain paired with the receiver.
Pairing
The system comes with camera(s) that have already been
paired. The pairing function assigns each camera to a different
channel on the wireless receiver (up to 4 Cameras), and it is
necessary for configuring additional cameras.
Use the UP
▼
and DOWN
▲
arrows to select the desired pairing
channel, and press the OK button to begin the pairing process
with a camera.
NOTE: It is highly recommended to pair the cameras to the
receiver before permanently mounting the cameras. See the pairing section on this manual for details.
Camera Pairing
The system comes with camera(s) that have already been paired. These cameras will communicate with
the receiver once powered on.
The pairing function assigns each camera to a different channel
on the wireless receiver (up to 4 cameras), and is necessary for
configuring additional cameras.
NOTE: It is highly recommended to pair the cameras to the
receiver before permanently mounting the cameras.
