manualshive.com logo in svg

Samsung CLP-550, Setup Manual, Page: 99 / 130

Share
Download
Samsung CLP-550 Setup Manual Download Page 99

P

RINTING

 T

ASKS

4.

10

Color Mode

(Continued)

If you click 

Adjust Color

, you can change 

the appearance of the document’s images.

Advanced     

Options

You can make advanced settings by clicking 
the 

Advanced Options

 button. 

Property

Description

2

The preview image 
shows the sample 
page with the 
settings you 
specified.

•

Color Basics

: You can adjust the  

appearance of the images by changing 
the settings in the 

Levels 

option.

•

Tone Tuning

: You can adjust the 

tonal range of images by changing the 

Tone Curve 

option.

•

Color Info

: This tab contains 

information about the driver’s color 
conversion system.

3

TrueType Options

This option is only avaliable when you  
use Windows 9x. This option 
determines what the driver tells the 
printer about how to image the text in 
your document. Select the appropriate 
setting according to the status of your 
document.
•

Download as Bit Image:

 When this 

option is selected, the driver will 
download the font data as bitmap 
images. Documents with complicated 
fonts, such as Korean or Chinese, or 
various types of fonts will print faster in 
this setting.

Summary of Contents for CLP-550



































































































































Reviews:

No comments