Samsung CLP-550 Setup Manual Download Page 26

Page: 26 / 130

ETUP

UIDE

English

All applications should be closed on your PC before beginning
installation.

Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.

If the CD-ROM drive does not automatically run:

Select

Run

from the

Start

menu, and type

x:\cdsetup.exe

in the Open box (where

is the drive

letter for the CD-ROM drive), then click

OTE

: If the

New Hardware Found

window appears during the

installation procedure, click

in the upper right corner of the box,

or click

Cancel

When the language selection window appears, select the
appropriate language.

If you can’t find the desired language from the screen,
scroll through the screen using the scroll button on the
bottom right of the screen.

Click

Install the Samsung Software on your PC.

The installation window opens. Click

Next

Follow the instructions on the window to complete the
installation.

OTE

: If you connect the printer with the USB cable at first and

then you want to use the parallel interface, remove the USB cable
and connect the parallel cable. Then reinstall the printer driver.

Summary of Contents for CLP-550



































































































































Search results

Summary of Contents for CLP-550

Reviews:

Samsung CLP-550, Setup Manual, Page: 26 / 130

Search results

Summary of Contents for CLP-550

Reviews: