manualshive.com logo in svg

Samsung CLP 500, Service Manual

Share
Download
Samsung CLP 500 Service Manual Download Page 36

7-5

Samsung Electronics

Alignment & Adjustments

Traninung Manual

7.2.2 Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. If a paper jam occurs, follow the
steps outlined below:

• Ensure that the adjustable guides are positioned correctly.

• Do not overload the tray. Ensure that the paper is below the paper capacity mark on the right

inside the tray.

7.2.3 Jam 0 In Tray 1

If paper is jammed in the paper feed area,'Jam0 In Tray1 ' appears on the display.

1. Using the handle open the right cover.

2. Carefully remove the misfed paper in the 

direction as shown.

3. Close the right cover .The printer resumes printing.

4. Pull the tray open. After you pull it all the way

out lift up the front part of the tray slightly to
release the tray from the machine.

5. Remove the jammed paper by gently pulling it

straight out.

6. To replace the tray lower the rear edge, align it

to the slot and slide it into the printer.

7. Close the right cover .The printer resumes print-

ing.

If there is any resistance, and the paper
does not move immediately when you pull,
stop pulling and go to step 4.

Summary of Contents for CLP 500



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands