background image

Precaution

Samsung Electronics

1-5

1-4 Installation Precautions

1. For safety reasons, more than two people are required

for carrying the product.

2. Keep the power cord away from any heat emitting

devices, as a melted covering may cause fire or electric
shock.

3. Do not place the product in areas with poor ventilation

such as a bookshelf or closet. The increased internal
temperature may cause fire.

4. Bend the external antenna cable when connecting it to

the product. This is a measure to protect it from being
exposed to moisture. Otherwise, it may cause a fire or
electric shock.

5. Make sure to turn the power off and unplug the power

cord from the outlet before repositioning the product.
Also check the antenna cable or the external connectors
if they are fully unplugged. Damage to the cord may
cause fire or electric shock.

6. Keep the antenna far away from any high-voltage cables

and install it firmly. Contact with the high-voltage cable or
the antenna falling over may cause fire or electric shock.

7. Check the basics of the screen test.

- Image position/size, Tilt adjustment

Summary of Contents for CL29K40MQ






















































































Reviews: