18
O
P E R AT I O N
Memorizing the Channels
Y
our TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH
and
CH
buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).
Selecting the V
ideo Signal-source
Befor
e your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Pr
ess the
MENU
button to
display the menu.
Press the
▲
or
▼
button
to select “Channel”, then
press the
ˇ
or
ˆ
button.
2
Repeatedly pr
ess the
ˇ
or
ˆ
button to cycle thr
ough
these choices:
ANT (antenna), STD, HRC
or IRC (all cable TV).
Press the
EXIT
button to
exit.
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable com
-
pany to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next
page).
ANT/CA
TV
ˇ
ˇ
ANT
ˆ
ˆ
Auto Program
ˆ
ˆ
TV/A
V
ˇ
ˇ
TV
ˆ
ˆ
Fine
Tune
ˆ
ˆ
Add/Erase
ˆ
ˆ
Channel
Move
Select
Exit
ANT/CATV
ˇ
ˇ
ANT
ˆ
ˆ
Auto Program
ˆ
ˆ
TV/A
V
ˇ
ˇ
TV
ˆ
ˆ
Fine
Tune
ˆ
ˆ
Add/Erase
ˆ
ˆ
Channel
Move
Select
Exit
