14
I
N S TA L L AT I O N
2
Connect an audio cable
between the AUDIO OUT-
PUT jack on the cam-
corder and the AUDIO
terminals on the side of
the TV.
3
Connect a video cable
between the VIDEO OUT-
PUT jack on the cam-
corder and the VIDEO ter-
minal on the side of the
TV.
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
Connecting a Camcor
der
The side panel jacks on your TV make it easy to connect a camcor
der to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or
Camcorder Tape” on page 26.)
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figur
e shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
Camcor
der
Output Jacks
Camcorder
Output Jacks
Audio Cable
Video Cable
TV Side Panel
Camcorder
Output Jacks
TV Side Panel
